ELECTRIC MORTICE LOCKS

Designed and manufactured in Australia, the 3570 series electric mortice is a high performance lock of superior quality. It is constructed from high grade zinc alloy, with a stainless steel latch bolt and face plate and is suited for all commercial applications.The lock can be operated by push buttons, intercom systems and key switches; or integrated with electronic access control systems for use with higher security devices such as keypads or card readers.

Designed with flexibility in mind, the one lock can cover all functions and is easily configured on site for the required application.

• Stainless Steel Latch and Faceplate• Stainless steel plates that encapsulate the body against attempted vandalism • Available in Monitored versions only

Monitoring Features

• Dead latched and Locked• Door position/Reed switch• Dual key override monitoring• Request to exit/REX• LED indication

Field Changeable Settings

• Fail safe/fail secure configuration.• Multi-voltage – will work on 12-24 Vdc systems.• Handing – left hand and right hand doors• Selection of free lever or locked lever on both sides of the door• Key override monitoring either side of the door• Monitoring contacts ? normally closed, normally open (for key override and request to exit only)

Note: this lock is designed to operate in conjunction with an electric strike. The lock will never unlock electrically from the external side.

Specification

The lock body should be encapsulated with stainless steel The lock should be capable of operation on voltages between 12 ? 24Vdc and have a current consumption not more than 80mA (holding) @12Vdc and 50mA (holding) @24Vdc. Monitored locks must be capable of monitoring the following functions: Key override, door position / reed switch, selectable hub / Request to exit, & locking bar status. All monitoring outputs must have the ability to be wired independently. All settings ? including: fail safe / fail secure, handing, hub selection must be field configurable.

Lock Functions

Designed to provide internal emergency egress on doors whereby the door remains secure on the outside in the event of a fire alarm or break glass event.A typical door set up would include the following hardware:

• Proximity readers on both sides of the door to gain access either way• Electric Mortice Lock set to fail safe inside. Note the lock remains in the locked state (externally)100% of the time if power is applied or not.• Electric strike set to fail secure• Break glass or Fire Panel connected to the mortice lock only

To enter or exit the door the user would swipe a proximity card to the reader. Upon authorisation from the EAC panel the electric strike would unlock, allowing the user to open the door. The electric mortice lock does not change state.In the event of an emergency (fire alarm or break glass activation), power is cut to the electric mortice lock & places it in a fail safe mode on the internal side only. The mortice lock remains in a fail secure state on the external side.Note: The 3579HS Series lock can never be electrically unlocked from the outside. A secondary locking device (electric strike) must be used in conjunction with this lock.

The Double Series Electromagnetic Locks operate with holding forces from 500kg up to 1160kg. Covering a range of applications these magnets are ideal for applications from access ways through to high use commercial swing doors. With fixing options including wood, aluminium and steel constructions, as well as glass door applications, the range caters to most electromagnetic needs.

Features

• Fail-safe: unlocks when power is removed
• Easy installation: suitable for both new and retrofit usage
• High holding force: refer to the technical data overleaf
• Self-alignment: armature plate pivots to accommodate door drop
• Silent operation: no humming or buzzing
• Dual voltage: site selectable 12 or 24 Vdc
• Monitoring; Hall-Effect and Reed Switch monitoring on all models
• Instantaneous release: Smart electronics on the Z Series electromagnets eliminate residual magnetism.

Applications

• Aluminium doors
• Double swing doors
• Access control
• Surface mount for inswing and outswing doors

Monitoring

Hall / Bond MonitoringThis indicates that the lock is powered and that the armature plate is in position and magnetically bonded (it monitors if the magnet is locked)

Reed switch monitoringAn integrated reed switch monitors the door position separately (it monitors the position of the door)

Standards and Compliance

• Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)
• CE Approved
• C-Tick Certified

Specification

Z4 MagnetHolding Force 500kg – 560kgDimensions (L)476 x (H)48 x (D)27 mmVoltage 12Vdc/ 24Vdc ±10%Current 900mA @ 12Vdc 450mA @ 24VdcMonitoring Hall-Effect/Bond sensing Reed SwitchOperating Temperature -10 to 55 DegreesOperating Humidity 0 – 95%

Holding force is measured directly between armature and magnet, holding force on the door may vary depending on the leverage created.Specification StatementThe Double Series Electromagnetic Lock should be constructed in an aluminium base with heavy duty electromagnet. The range only operates in fail safe mode and relies on a secondary lock or battery backup system. The lock needs to be equipped with “smart electronics” that have zero residual magnetism, (instantaneous release). This is crucial for correct operation. _________________________________________________________

Dimensions