ALARM.COM
Showing all 3 results
-
SKU: ADC-FLEX-100-AP-AT
ADC FLEX I/O IP56
ALARM.COM, BY FUNCTION, BY MANUFACTURER, CELLULAR SENSORS, CELLULAR SENSORS, INTRUSION, STAND ALONE DEVICES, STAND ALONE DEVICESALARM.COM, BY FUNCTION, BY MANUFACTURER, CELLULAR SENSORS, CELLULAR SENSORS, INTRUSION, STAND ALONE DEVICES, STAND ALONE DEVICESADC FLEX I/O IP56
- Stand alone battery operated single input monitoring device
- Uses 4 x 1.5V AA lithium batteries
- 2 year expected battery life (usage & installation environment dependent)
- On board 4G Modem
- Can be used as a reed switch or to monitor 3rd party devices
- Can use EOL or just loop monitored
- Fitted with relay output (requires external power supply to FLEX IO for this to be functional)
- If using external power supply a 6-15VDC supply is required, battery backup is strongly recommended
- IP56, suitable for external use
- Fully compatible with alarm.com
- Requires alarm.com subscription
SKU: ADC-FLEX-100-AP-AT -
SKU: ADC-EPX-400-A30C
ADC-EPX-400-A30C Universal Communicator 4G AT&T Global Sim
ALARM.COM, BY FUNCTION, BY MANUFACTURER, COMMUNICATOR, COMMUNICATOR, INTRUSIONALARM.COM, BY FUNCTION, BY MANUFACTURER, COMMUNICATOR, COMMUNICATOR, INTRUSIONADC-EPX-400-A30C Universal Communicator 4G AT&T Global Sim
ADC-EPX-400-A30C
- Universal communicator to enable almost any control panel to become compatible with the alarm.com network
- Requires external 16 20VAC power supply & external back up battery
- Allows control panel to report via ethernet or 4G for redundant reporting paths
- Supports CID, SIA & XML reporting protocols
- Has outputs for keyswitch area control for panels supporting this feature
SKU: ADC-EPX-400-A30C -
SKU: ADC-LX30B-Q30T
ADC-LX30B-Q30T Universal Communicator 4G AT&T Global Sim
ALARM.COM, BY FUNCTION, BY MANUFACTURER, COMMUNICATOR, COMMUNICATOR, INTRUSIONALARM.COM, BY FUNCTION, BY MANUFACTURER, COMMUNICATOR, COMMUNICATOR, INTRUSIONADC-LX30B-Q30T Universal Communicator 4G AT&T Global Sim
ADC-LX30B-Q30T
- Universal communicator to enable almost any control panel to become compatible with the alarm.com network
- Requires external 13.8VDC supply. Will accept 12 14VDC.
- Allows control panel to report via ethernet or 4G for redundant reporting paths
- Supports CID, SIA & XML reporting protocols
- Has outputs for keyswitch area control for panels supporting this feature
- Keybus connection to supported alarm control panels. Allows for virtual keypad functionality.
SKU: ADC-LX30B-Q30T